Показано с 1 по 7 из 7

Тема: vsftpd не запускается

  1. #1
    Member
    Регистрация
    13.06.2009
    Сообщений
    88

    По умолчанию vsftpd не запускается

    CentOS 5
    ISPmanager-Pro 4.3.25

    Сервисы - FTP - vsftpd не запускается

    Jun 12 19:25:05 INFO Request [89.112.49.35][root] 'func=feature.edit&elid=ftp&operafake=50'
    Jun 12 19:25:08 INFO Request [89.112.49.35][root] 'version=vsftpd-2.0.5-12.el5_3.1&func=feature.edit&elid=ftp&sok=ok&suok= ++++Ok++++'
    Jun 12 19:25:08 INFO Request [89.112.49.35][root] 'func=feature'
    Jun 12 19:25:15 INFO Request [pkgctl][root] 'out=text&func=services.edit&elid=FTP'
    Jun 12 19:25:15 EXTINFO Load config '/var/spool/cron/root'
    Jun 12 19:25:15 ERROR Assert 'FTP' in 'service' failed
    Jun 12 19:25:15 ERROR Exception 3: 'service' not exists.
    Jun 12 19:25:15 INFO Request [pkgctl][root] 'out=text&func=services.edit&name=FTP&type=ftp&pro c=vsftpd&confname=vsftpd&start=%2Fetc%2Frc%2Ed%2Fi nit%2Ed%2Fvsftpd %20start&stop=%2Fetc%2Frc%2Ed%2Finit%2Ed%2Fvsftpd% 20stop&autostart=on&ip=&sok=yes&elid='
    Удалить и установить vsftpd через "Настройки -> Возможности" получается, но запустить сервис не выходит.

  2. #2
    Служба поддержки
    Регистрация
    24.06.2006
    Адрес
    ISPSystem corp
    Сообщений
    901

    По умолчанию

    В разделе "Сервисы" посмотрите какая команда для запуска прописана. И попробуйте ее выполнить в ssh. Будет понятно в чем дело.

  3. #3
    Member
    Регистрация
    13.06.2009
    Сообщений
    88

    По умолчанию

    Код:
    -bash-3.2# /etc/rc.d/init.d/vsftpd start
    Starting vsftpd for vsftpd:                                [  OK  ]
    
    -bash-3.2# /etc/rc.d/init.d/vsftpd status
    \vsftpd dead but subsys locked
    Пробовал удалять lock и перезапускать, эффекта не дало

  4. #4
    Senior Member
    Регистрация
    12.02.2007
    Сообщений
    1,140

    По умолчанию

    Посмотрите логии самого FTP сервера, там скорее всего найдете причину
    Когда мне становится скучно, я скачиваю новый release

  5. #5
    Member
    Регистрация
    13.06.2009
    Сообщений
    88

    По умолчанию

    Цитата Сообщение от Ангел_Хранитель Посмотреть сообщение
    Посмотрите логии самого FTP сервера, там скорее всего найдете причину
    /var/log/vsftpd.log не такого файла
    может быть не там смотрю?

    /etc/vsftpd/vsftpd.conf
    Код:
    # Example config file /etc/vsftpd/vsftpd.conf
    #
    # The default compiled in settings are fairly paranoid. This sample file
    # loosens things up a bit, to make the ftp daemon more usable.
    # Please see vsftpd.conf.5 for all compiled in defaults.
    #
    # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
    # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
    # capabilities.
    #
    # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
    anonymous_enable=YES
    #
    # Uncomment this to allow local users to log in.
    local_enable=YES
    #
    # Uncomment this to enable any form of FTP write command.
    write_enable=YES
    #
    # Default umask for local users is 077. You may wish to change this to 022,
    # if your users expect that (022 is used by most other ftpd's)
    local_umask=022
    #
    # Uncomment this to allow the anonymous FTP user to upload files. This only
    # has an effect if the above global write enable is activated. Also, you will
    # obviously need to create a directory writable by the FTP user.
    #anon_upload_enable=YES
    #
    # Uncomment this if you want the anonymous FTP user to be able to create
    # new directories.
    #anon_mkdir_write_enable=YES
    #
    # Activate directory messages - messages given to remote users when they
    # go into a certain directory.
    dirmessage_enable=YES
    #
    # Activate logging of uploads/downloads.
    xferlog_enable=YES
    #
    # Make sure PORT transfer connections originate from port 20 (ftp-data).
    connect_from_port_20=YES
    #
    # If you want, you can arrange for uploaded anonymous files to be owned by
    # a different user. Note! Using "root" for uploaded files is not
    # recommended!
    #chown_uploads=YES
    #chown_username=whoever
    #
    # You may override where the log file goes if you like. The default is shown
    # below.
    #xferlog_file=/var/log/vsftpd.log
    #
    # If you want, you can have your log file in standard ftpd xferlog format
    xferlog_std_format=YES
    #
    # You may change the default value for timing out an idle session.
    #idle_session_timeout=600
    #
    # You may change the default value for timing out a data connection.
    #data_connection_timeout=120
    #
    # It is recommended that you define on your system a unique user which the
    # ftp server can use as a totally isolated and unprivileged user.
    #nopriv_user=ftpsecure
    #
    # Enable this and the server will recognise asynchronous ABOR requests. Not
    # recommended for security (the code is non-trivial). Not enabling it,
    # however, may confuse older FTP clients.
    #async_abor_enable=YES
    #
    # By default the server will pretend to allow ASCII mode but in fact ignore
    # the request. Turn on the below options to have the server actually do ASCII
    # mangling on files when in ASCII mode.
    # Beware that on some FTP servers, ASCII support allows a denial of service
    # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
    # predicted this attack and has always been safe, reporting the size of the
    # raw file.
    # ASCII mangling is a horrible feature of the protocol.
    #ascii_upload_enable=YES
    #ascii_download_enable=YES
    #
    # You may fully customise the login banner string:
    #ftpd_banner=Welcome to blah FTP service.
    #
    # You may specify a file of disallowed anonymous e-mail addresses. Apparently
    # useful for combatting certain DoS attacks.
    #deny_email_enable=YES
    # (default follows)
    #banned_email_file=/etc/vsftpd/banned_emails
    #
    # You may specify an explicit list of local users to chroot() to their home
    # directory. If chroot_local_user is YES, then this list becomes a list of
    # users to NOT chroot().
    #chroot_list_enable=YES
    # (default follows)
    #chroot_list_file=/etc/vsftpd/chroot_list
    #
    # You may activate the "-R" option to the builtin ls. This is disabled by
    # default to avoid remote users being able to cause excessive I/O on large
    # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
    # the presence of the "-R" option, so there is a strong case for enabling it.
    #ls_recurse_enable=YES
    #
    # When "listen" directive is enabled, vsftpd runs in standalone mode and 
    # listens on IPv4 sockets. This directive cannot be used in conjunction 
    # with the listen_ipv6 directive.
    listen=YES
    #
    # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
    # sockets, you must run two copies of vsftpd whith two configuration files.
    # Make sure, that one of the listen options is commented !!
    #listen_ipv6=YES
    
    pam_service_name=vsftpd
    userlist_enable=YES
    tcp_wrappers=YES
    chroot_local_user=YES
    force_dot_files=YES
    background=YES
    anonymous_enable=NO

  6. #6
    Member
    Регистрация
    13.06.2009
    Сообщений
    88

    По умолчанию

    Проблема решилась перезапуском сервера.
    ЗАКРЫТО.

  7. #7
    Senior Member Аватар для vadim s. sabinich
    Регистрация
    03.12.2008
    Адрес
    Russia
    Сообщений
    336

    По умолчанию

    Тему закрыл. Суета не редко враг в таком деле, как администрирование.
    // mef

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •